View PC817X_4604.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

I
SW ELECTRONIC COMPONENTS GROUP SHARP CORPORATION
SPEC.
No.
ED-94054D Junel4, 1996
1 ISSUE
SPECIFICATION
DEVICE SPECIFICATION FOR Business
dealing name
PHOTOCOUPLER MODEL No.
PC817
1.
These Please
specification sheets include do not reproduce or cause
materials protected anyone to reproduce
under them
copyright of Sharp Corporation without Sharp's consent.
("Sharp").
2.
When using this product, please observe the absolute maximum ratings and the instructions in these specification sheets, as well as the precautions mentioned below. Sharp assumes for any damage resulting from use of the product which does not comply with the absolute and the instructions included in these specification sheets, and the precautions mentioned (Precautions) (1) This
for use outlined no responsibility maximum ratings below.
product
is designed
for use visual
in the following equipment
application
areas
:
* OA equipment * Telecommunication
* Audio
equipment (Terminal) * Computers * Tooling machines [ If the use of the product in the above application (21 or (31. please be sure to observe the precautions
* Home appliances * Measuring equipment
areas is for equipment listed in paragraphs given in those respective paragraphs. redundant design considering should be taken to ensure which demands high reliability etc.) equipment
1
(21 Appropriate measures, such as fail-safe design and the safety design of the overall system and equipment, and safety when this product is used for equipment safety in function and precision, such as : * Transportation * Traffic [ * Other (31 control and leakage safety equipment breakers
reliability and
signals * Gas safety equipment
sensor
(aircraft, train, automobile * Rescue and security
1
Please do not use this product for equipment which and safety in function and precision. such as : * Space [ * Nuclear equipment power control * Telecommunication equipment equipment * Medical
require (for
extremely trunk lines)
high
reliability
equipment if there are
,I
any questions about this product. "I L/
(41 Please contact and consult with a Sharp sales representative regarding interpretation of the above three paragraphs. 3. Please contact and consult with a Sharp sales representative for any
questions
CUSTOMER'S
APPROVAL
DATE PRESENTED BY
DATE
BY
T. Matsumura, Department General Manager Engineering Dept.,11 Opto-Electronic Devices Div. ELECOM Group SHARP CORPORATION
of
SHARP CORPOMITION
ED-94054D
MODEL No.
1
June
14, 1996
PAGE
PC8 17x
l/8
1. Application This speciiication applies to the outline and characteristics Model-No. PC8 17series. of photocoupler
2. Outline Refer to the attached drawing No. CY696 lK02.
3. Ratings and characteristics Refer to the attached sheet, page 3 to 6.
4. Reliability Refer to the attached sheet, page 7.
5. Incoming inspection Refer to the attached sheet, page 8.
6. Supplement 6.1 Isolation voltage shall be measured in the following method. (1) Short between anode to cathode on the primary side and between collector to emitter on the secondary side. (2) The dielectric withstand tester with zero-cross circuit shall be used.
(31 The wave form of applied voltage shall be a sine wave. (It is recommended that the isolation voltage be measured in insulation
oil.)
SHflRP CORPORATION
ED-94054D
MODEL No.
1
June
14. 1996
PAG E
I
PC817X
2/B
6.2 Business dealing name (,,0" mark indicates business dealing name of ordered product)
Test conditions IF=5mA
Ta=25C
6.3 This Model is approved by UL. Approved Model No. : PC8 17` UL file No. : E64380
6.4 This product is not designed against irradiation. This product is assembled with electrical input and output. This product incorporates non-coherent light emitting diode.
7. Notes Refer to the attached sheet- 1- 1, 2.
SHARP CORPORATION
ED-94054D MODEL No.
1
June
14, 1996 PAGE
PC8 17x
3. Ratings and characteristics 3.1 Absolute maximum ratings Ta=25%
3/8
Collector current * 1 Collector power dissipation * 1 Total power dissipation *3 Isolation voltage Operating temperature Storage temperature *4 Soldering temperature PC Ptot
Vii0
150 200 5 -30 to +lOO -55 to +125 260
mW mW kVrms `C "C "C
Topr Tstg Tsol
*l
The derating factors of absolute maximum ratings due to ambient temperature are shown in Fig. 1 to 4. /IS, Duty ratio : 0.001 (Refer to Fig. 5)
*2 Pulse widths100
*3 AC for 1 min. 40 to 6O%RH *4 For 10s
SHARP CORPORATION
ED-94054D
MODEL No.
1
June
14. 1996
PAGE
PC8 17x
3.2 Electra-optical characteristics Ta=25'C
4/B
Peak forward volta
Dark current Collector-emitter breakdown voltage Emitter-collector breakdown voltage Collector current Collector-emitter saturation voltage Isolation resistance Transfer characteristics
E EO
BvCEO
v,,=2ov, Ic=O. 1mA I,=0
I,-0
35
-
100 -
nA V
output
BvECO
I,=10 PA, I,=0
6
-
-
V
IC
IF=5mA, V,,=5V 1,=2omA Ic=lmA DC500V 40 to 6O%RH v=o, f=lMHz v,,=5v, Ic=2mA R,=lOO R, -3dB v,,=2v Ic=2mA R,=lOO n
2.5
0.1
30 0.2
mA v
VCEbat) RIS0
5XlO'O
10"
-
R
Floating capacitance Cut-off frequency
c-f fc
0.6 80
1.0 -
pF kJ3z
Rise time Fall time
tr tf
4 3
18 18
/IS ps
SHARP CORPORATION
ED-94054D MODEL No.
1
June
14, 1996 PAGE
PC8 17X
5/8
Rank mark Anode mark m cu dd &G 34 d 1, / Factory identification mark
l2
!,
\
Pin Nos. and internal connection diagram
m
4 3
k
7. 62'0.3 ?
*11 2-digit number shall be marked according to DIN standard. UNIT: *2) Factory identification *3) Marking mark shall be or shall not be marked. I Name Drawing I hh I PC817 Outline Dimensions (Business dealing name : PC8 17X1 I CY696 1K02 l/l mm
is laser marking
SHFIRP CORPORATION
I
ED-94054D
MODEL No.
1
June
14. 1996
PAGE
PC817X
6/8
(Fig.
1) Forward current vs. ambient temperature
3 a z ,a 100 80 70 60 40
(Fig. 2) Diode power dissipation vs. ambient temperature
t
I
I
I
I
p
0 -30
0
25
55
75
100
125
25
125
Ambient temperature
Ta ( "C)
Ambient temperature
Ta (`C I
(Fig. 3) Collector power dissipation vs. ambient temperature T
(Fig. 4) Total power dissipation vs. ambient temperature
-30
0
25
50
75
100
125
-30
0
25
50
75
100
125
Ambient temperature
Ta ( "C)
Ambient temperature
Ta ("C)
(Fig. 5) Peak forward current vs. duty ratio Pulse widths100 Ta=25"C ps
Duty ratio
SHflRP CORPORFITION
ED-94054D
MODEL No.
1
June
14, 1996
PAGE
PC817X
7/8
4. Reliability The reliability of products shall be satisfied with items Iisted below. Coni?dence level : 90% LTPD: 10%/20% Test Items Test Conditions *1 Solderability *2 230C. 5 s 260-C, 10 s Weight : 5N 5 s/each terminal Weight : 2.5N 2 times /each terminal 15000m/s2, 0.5ms 3 times/ tX, -tY, fZ direction 100 to 2000 to 100Hz/4min 200m/ s2 4 times/ X, Y, Z direction 1 cycle -55C to +125C (30minl (30min) 20 cycles test +6O"C, 9O%RH, lOOOh U : Upper specification limit L:Lower specification limit Failure Judgement Criteria Samples b-i Defeclive(C n=ll, n=ll, n=ll, v,>ux Ia>UXZ
EEO
c=o C=O C=O
Soldering heat TerminaI strength (Tension) Terminal strength (Bending) *3 Mechanical shock
1.2 n=ll, C=O
`IJX2
n=ll,
C=O
Ic `ux ' *2
Variable frequency vibration
n=ll,
C=O
Temperature cycling
n=22 ,C=O
High temp. and high humidity storage High temp. storage Low temp. storage Operation life
n=22,C=O
+125C, lOOOh -55%) 1OOOh Ir=5OmA, Ptot=200mW Ta=25%, lOOOh
n=22 ,C=O h n=22,C=O n=22,C=O
* 1 Test method, conforms to JIS C 702 1. *2 Solder shall adhere at the area of 95% or more of immersed portion of lead and pin hole or other holes shall not be concentrated on one portion. *3 Terminal bending direction is shown below.
F7
SHARP CORPORATION
ED-94054D
MODEL No.
1
June
14, 1996
PAGE
PC817X
818
5. Incoming
inspection items characteristics Viso
5.1 Inspection (11 Electrical
V,, I,, ICEO, VCEfsatl. Ic, R,,. (21 Appearance
5.2 Sampling
method
and Inspection
level
A single sampling plan, normal inspection level II based on IS0 2859 is applied. The AQL according to the inspection items are shown below.
Defect Major defect Minor defect
Inspection
item
AQL (%)
Electrical characteristics Unreadable marking Appearance defect except the above mentioned.
0.1
0.4
SHARP CORPORATION
ED-94054D MODEL No.
1
June
PC817X
14, 1996 PAGE Attach sheet- I- 1
Precautions
for Photocouplers
1 For cleaning (1) Solvent cleaning : Solvent temperature 45C or less Immersion for 3 min or less : The affect to device by ultrasonic cleaning is different by cleaning bath size, ultrasonic power output, cleaning time, PWB size or device mounting condition etc. Please test it in actual using condition and con&-m that doesn't occur any defect before starting the ultrasonic cleaning. : Ethyl alcohol, Methyl alcohol Freon TE v TF, Diflon-solvent
(21 Ultrasonic
cleaning
Applicable
solvent
S3-E
Please refrain form using Chloro device as much as possible since the ozonosphere. Before you use to con&-m that it does not attack
Fluoro Carbon type solvent to clean it is internationally restricted to protect alternative solvent you are requested package resin.
2. The LED used in the Photocoupier generally decreases the light emission power by operation. In case of long operation time, please design the circuit with considering the degradation of the light emission power of the LED. (50%/5years)
SHARP CORPORATION
ED-94054D MODEL No.
1
June
PC817X
14. 1996 PAGE Attach sheet- l-2
3. Precautions
for Soldering
Photocouplers
(1) In case of soldering to lead 260 `C 10 s or less
An example of device temperature vs. soldering time 130 160 -
l-10 120 Device temperature ("Cl I
.a*-
_.-.- *.--
.*--
0.
' ' 024
' 6
' 8 10 12 14 llj 18 20 time (s)
'
'
'
'
'
Soldering
(2) If solder
reflow
:
It is recommended thatonly one soldering be done at the temperature and the time within the temperature profile as shown in the figure.
(3) Other
precautions
An infrared lamp used to heat up for soldering may cause a localized temperature rise in the resin. So keep the package temperature within that specified in Item (2). Also avoid immersing the resin part in the solder.

▲Up To Search▲

Price & Availability of PC817X

	To Download PC817X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .